Staggered Configuration Spec Sheet
Factory-bound harnesses of individual Spiral or Straight configuration Quik-Pull assemblies, with pre-specified construction and break-out locations. Any wire type — building, electronic, coax, fiber optic, etc.
For power, risers, conveyors and other situations where exact measurements of break-out points can be specified at the time of order.
|Conductor||Any combination of electronic, coaxial, twisted pairs and single conductors.|
|Insulation||As required by the conductor designation, e.g. MTW, THHN, TFFN, XHHW, plus any electronic cables, e.g. coaxial, low-voltage control, fire alarm. Specification for conductors used will be furnished on request.|
|Conductor ID||Alpha-numeric characters, words, sentences. Standard sequential number coding. Colors, striping and other alpha-numeric coding available.|
|Listing||UL Listed Processed Wires. E76139.|
|Cabling||Individual bundles assembled as Spiral or Straight Configuration. Binder thread around entire assembly.|
|Binder||Two flat 5040 denier nylon threads are spaced 1″ apart and wrapped in opposite directions around the entire assembly. Electrical tape used as needed.|
|Footage||Sequential footage marker under outer binder thread.|
|Packaging||No-charge, non-returnable wooden reel. Reel tag contains type, size and beginning and ending sequential footage numbers.|