One-Pull Wire Configurations for Elevator/Lift Installations

Easy Wire Pulling for Lift Installations with One-Pull

When you’re going to be putting yourself or your belongings in a box that goes up multiple floors you want to know that the wiring and cables used to get it running won’t let you down. With One-Pull solutions you can get every wire and cable throughout the length of the elevator/lift with ease and efficiency that you simply would not be able to achieve without our custom harnesses and configurations. Whether you’re breaking lines off at different floors or running them from the basement to the roof, we’ve got you covered!

Which Wire Configuration Works Best for Elevator and Lift Pulls?

(They all work, but some make things easier for you than others)

  • One-Pull Staggered Wire Configurations can make the whole wiring process more efficient when multiple wires and cables need to get to different end destinations.
  • Consider using a pull tab harness for complicated pulls, this can make breaking wires up in batches that go to different endpoints.
  • If you need large batches of wires to run long distances together, a bound harness rather than cross tab works best.

Questions? comments? Ready to order? Give us a call at 1-833-663-7855 to get started or submit a request for quote online!

Request For Quote

Got a question or need a quote call 1-833-663-7855 or fill out the form below.

Fill out my online form.


Save Time & Money, Save On Wire And Labor with One-Pull!

Price Comparison Example

Job: 55 Conductors/685ft Pull
Pulling 55 Singles One-Pull 55/C Cable
Wire/Qty $78/MFT $2,938.65 @ 37,675 ft $4,738.75 @ 37,675 ft
Estimated/Average Labor Rate $75/hr $75/hr
Measure/Order 4hrs 4hrs
Setup/Tag/Pull 220 hrs 48.4 hrs
Ring out 5.5 hrs 0
Terminate 4.4 hrs 4.6 hrs
Total Labor 233.9 hrs 57.0 hrs
Quantity of Reels to Setup 55 reels 1 reel
Balance of Material 18 x 455 ft, 1 x 1,815 ft* 0
TOTAL COST $20,481.15 $9,012.50
Savings of $11,468.65 (Over 50%)

 

* Job requires 37,675 ft of wire, but customer must purchase 47,500 ft of wire to complete the job. Almost 10,000 ft more than needed!
19 spools @ 2,500 ft are required to get 55 cuts at 685 ft each which leaves 18 x 445 ft short pieces and 1 x 1,815 ft
The 9,825 ft of excess wire requires the contractor to pay an additional $766.35 for wire they must store, tying up cashflow or recycle.